BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Luftmeister anti dive kit install Empty Luftmeister anti dive kit install Wed Nov 02, 2022 9:36 pm

larsf

larsf
active member
active member
Can someone help with instructions on how to install a luftmeister anti dive kit? Pic attached. It has a set of springs, black bumpers?, billeted caps?, screws and washers.

Luftmeister anti dive kit install 87e37e10

    

2Back to top Go down   Luftmeister anti dive kit install Empty Re: Luftmeister anti dive kit install Fri Nov 04, 2022 11:02 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
I fitted one of Matt Capri's anti-dive kits in an Airhead back in the late '80s. It took heaps of time trying to clean out the black rubber 'bumpers' which got pounded into rubber silt in a short time - installed per the instructions given to me by him at the York PA MO rally. I'd steer clear from that answer looking for a question. Luftbluster had some ideas that weren't fully thought through.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

Dai

Dai
Life time member
Life time member
It's not even an anti-dive kit. It just stiffens up the suspension preload. You're far better spending the dollar equivalent of approx £100 and buying some stiffer front springs. That works a treat - BTDT on two bikes. Put a new shock on the rear and you'll swear someone stole your bike then gave you back a new one with the same scratches in the paintwork.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

larsf

larsf
active member
active member
I installed new progressive springs and rear suspension, heavy fork oil, and longer pvc spacers and I still get a lot of dive when I hit the brakes. Stiffening the rear helped a bit. The longer pvc spacers on top of the springs just made the ride height higher.

So does this kit install on the bottom? Do you need to take the entire fork off? Where does the screw go?

    

5Back to top Go down   Luftmeister anti dive kit install Empty Re: Luftmeister anti dive kit install Sat Nov 05, 2022 10:45 pm

Point-Seven-five

Point-Seven-five
Life time member
Life time member
I got rid of most of the brake dive as well as making the ride less harsh on the crap roads of New York State by installing Race Tech Gold Valve Emulators and fork springs.

Not cheap, about $290 on eBay, but my K75RT rides so much better.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum