1 wiring diagram with M.unit blue,BEP3.0,motoscope mini,MSM combi,M.button Tue Oct 15, 2019 3:30 am
Harimau
active member
Dear All,
Hi, I am a new member from Japan and I am having a hard time reaching out to the people who has knowledges that I need to complete my work in my region.
Also this is my first attempt to join in a forum, so pls let me know if I'm using inappropriate manner.
Last year,I have purchased a 87 K100LT for my first motorcycle rebuild project in my life and I don't have any engineer skilled back ground.
My bike was not on the road for quite a long time from how it look. It came as a stock condition with 48000km on it.
Before I started to tear down, I tried to start the engine and it sounded fine and idled stable. but never had a chance to ride around town since it was not registered. (the seller said it could ride strait and stops when it needed)
long story short,After all the work, I was trying to finalize the project by completing the new wiring integrating M.unit,BEP3.0,motoscope mini,MSM combi,M button
There was not a complete diagram so I patched up the diagram from a few example from the internet.
Last week before my 1st attempt to ignite, I cleaned the injector, fitted a new fuel pump+cleaner and tried to crank it for the first time. but she only coughs 3sec at the longest and after a while I keep trying to turn over, the fuel started to drain out from the joint of the muffler.
I should go into the trouble shooting to check every element, but before that, I need a big favor from someone who can take a look at my diagram to check if there is a crucial error there.
I am having consecutive unknown error uploading the pdf so I put a link to my file.
https://drive.google.com/file/d/1o7XcJkPh3-60_TqFEhkKTCbwwsax9dqy/view?usp=sharing
Thanks in advance for your tips
Kentaro
Hi, I am a new member from Japan and I am having a hard time reaching out to the people who has knowledges that I need to complete my work in my region.
Also this is my first attempt to join in a forum, so pls let me know if I'm using inappropriate manner.
Last year,I have purchased a 87 K100LT for my first motorcycle rebuild project in my life and I don't have any engineer skilled back ground.
My bike was not on the road for quite a long time from how it look. It came as a stock condition with 48000km on it.
Before I started to tear down, I tried to start the engine and it sounded fine and idled stable. but never had a chance to ride around town since it was not registered. (the seller said it could ride strait and stops when it needed)
long story short,After all the work, I was trying to finalize the project by completing the new wiring integrating M.unit,BEP3.0,motoscope mini,MSM combi,M button
There was not a complete diagram so I patched up the diagram from a few example from the internet.
Last week before my 1st attempt to ignite, I cleaned the injector, fitted a new fuel pump+cleaner and tried to crank it for the first time. but she only coughs 3sec at the longest and after a while I keep trying to turn over, the fuel started to drain out from the joint of the muffler.
I should go into the trouble shooting to check every element, but before that, I need a big favor from someone who can take a look at my diagram to check if there is a crucial error there.
I am having consecutive unknown error uploading the pdf so I put a link to my file.
https://drive.google.com/file/d/1o7XcJkPh3-60_TqFEhkKTCbwwsax9dqy/view?usp=sharing
Thanks in advance for your tips
Kentaro