1
Hello from Brisbane! Sat Jun 08, 2019 12:37 pm
JakeS41y
active member
Hi everyone,
I recently bought a 1986 K100RT back in April and have been slowly working my way through fixing it. Don't usually post on forums but from what I've read on this one you guys have been really helpful already. Anyway here is my fix list so far
Already Fixed (after purchase)
Front Brake Master Cylinder- the little O ring leaked and corroded the whole assembly, managed to track down a 2nd hand one along with a clutch leaver & assembly for about $180 which I thought was pretty good
Rear Brake Resevoir- Had a small leak BUT made a cracking noise when I tightened it up after bleeding it and thought better replace this before it crumbles (which happened the next week) just bought a CNC alluminium one off ebay and it seems to be going strong
To Do
Rear Main Seal- Got all the parts on order, just waiting for them to arrive
Clutch Disc- Because oil leaked out from the main seal onto clutch (was like a waterfall when I removed the clutch assembly, probably should have drained oil first to avoid mess but clutch was already toast). Ordered one from Munich Motorcycles for $180~ and it arrived from WA the next day, so far very impressed with their service.
Incidental screws, washers, snaps and Orings- Most on hand, waiting for BMW to get them in for me
Oils- Engine, Clutch and Final Drive to be replaced when reassembling after RMS.
I recently bought a 1986 K100RT back in April and have been slowly working my way through fixing it. Don't usually post on forums but from what I've read on this one you guys have been really helpful already. Anyway here is my fix list so far
Already Fixed (after purchase)
Front Brake Master Cylinder- the little O ring leaked and corroded the whole assembly, managed to track down a 2nd hand one along with a clutch leaver & assembly for about $180 which I thought was pretty good
Rear Brake Resevoir- Had a small leak BUT made a cracking noise when I tightened it up after bleeding it and thought better replace this before it crumbles (which happened the next week) just bought a CNC alluminium one off ebay and it seems to be going strong
To Do
Rear Main Seal- Got all the parts on order, just waiting for them to arrive
Clutch Disc- Because oil leaked out from the main seal onto clutch (was like a waterfall when I removed the clutch assembly, probably should have drained oil first to avoid mess but clutch was already toast). Ordered one from Munich Motorcycles for $180~ and it arrived from WA the next day, so far very impressed with their service.
Incidental screws, washers, snaps and Orings- Most on hand, waiting for BMW to get them in for me
Oils- Engine, Clutch and Final Drive to be replaced when reassembling after RMS.
K1100RS/LT - R1200RT - R1100RS - Cagiva SST 350 Ala Verde - K75LT project - K75 Schurgers - K75S - K1100RS - K75RT - K75C
