Welcome!

What are you riding?  Where are you located?  There is a fair number of brick riders between Toronto and Niagara Falls, and a few more in New York near the border.

WelKome to the forum!

WelKome from the other side of the border. 

One post consisting of an emoji.  Hit and run?

and there is one in the London area....me

Welcome from Northern NY .

sorry for not being on the forum too much.
The bike I have is 1989 K100 RS with the ABS 1 .
I have not been riding much in the past 10 years and just working on getting the bike back in shape.
Needs Tires - in the process of getting them put on.
Needs Brakes - Pads and Rotors- Looking on how to do it myself.
Overall checking on what is needed.

What part of Ontario are you in?  

I am pretty sure I have a set of usable front rotors you can have cheap, even cheaper if I can smuggle them in for you.  There is a source for organic/kevlar pads at a very good price on eBay(under $20 for both front calipers).

These are what I use on my bike.  Sometimes they take a bit of trimming with a file to fit easily, but the compound is very good with a lot of stopping power without tearing up the rotors.  They have a tendency to squeal if you don't use anti-squal on the back when you install them.

https://www.ebay.com/itm/1989-1992-BMW-K100RS-16-valve-Front-Rear-Brake-Pads/161709597631?_trkparms=aid%3D555018%26algo%3DPL.SIM%26ao%3D1%26asc%3D20131003132420%26meid%3D7a31e22952c9408c9fd2496ab912198d%26pid%3D100005%26rk%3D1%26rkt%3D24%26sd%3D362173264954%26itm%3D161709597631&_trksid=p2047675.c100005.m1851

Point Seven Five
Thanks for the offer but not quite ready yet.
I live in the Toronto area and have done some research. I think I found a place to get aftermarket parts.
My bike is the 8 valve model I believe. The other problem I am having is the ABS1.  Hard to buy something online without knowing the full specs.
Probably start on the Brakes next year as I still have some life in them.