BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


lefthander

lefthander
Silver member
Silver member
I have a 1992 k75 standard with a low seat. Has anyone ever wired a BMW navigator 3 with the mounting cradle to their bike? Any pictures or help would be great. Thanks



Last edited by lefthander on Sun Feb 17, 2019 4:52 pm; edited 1 time in total

    

prince

prince
Silver member
Silver member
I just installed a Nav IV as a second gps on my K1600.

I bought BMW repair connector pn 83300413586 to plug into the cradle wiring. I don't like cutting wires if I don't have to. I pulled the power from my PDM60 since it provides switched power.

Red is positive and black is negative.


See this post: https://advrider.com/f/threads/wiring-bmw-navigator-iv.565952/

I can report the Nav IV powers up perfectly. The best part is I can remove the Nav cradle and move it to my K100 when I want to because I bought a second repair connector for it.


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

prince

prince
Silver member
Silver member
Help wiring Navigator 3 to 92 k75 standard low seat Img_2014


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

Two Wheels Better

Two Wheels Better
Moderator
Moderator
lefthander wrote:I have a 1992 k75. Has anyone ever wired a BMW navigator 3 with the mounting cradle to their bike? Any pictures or help would be great. Thanks
The Nav III was standard equipment about ten years ago. If you also have the base and the factory power plug you only have to find a suitable switched 12V and earth point. I have the Nav III unit on my K1200R and it plugs directly into the wiring loom up the front. My suggestion, for keeping the electrical portion of the installation tidy, is to determine the plug type of the Nav you have and obtain the other side of the plug with a length of loom from BMW. These images are what's available from BMW. They're readily available, though not always cheap, but will provide you with an easily removable plug that you wire in to the aforementioned power and ground points. Where and how you physically mount the unit and cradle is a custom affair. There was a bloke selling a metal 'shelf' that fit behind and across the RS windscreen. I have one in Australia, but have never fit it to the bike. A handlebar mount such as RAM or other might be preferable on a K75, but you don't specify which model 75 you have....recommend placing that info in your signature line for all to see at a glance.
Help wiring Navigator 3 to 92 k75 standard low seat Screen12
Help wiring Navigator 3 to 92 k75 standard low seat Screen13
HERE is a link to the ETK page so you can access the part numbers of the plug you need.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

BobT

BobT
Life time member
Life time member
I am trying very hard to understand what the low seat has to do with a GPS?

    

lefthander

lefthander
Silver member
Silver member
Suggestion was made to describe the model k75 I have. Just giving all info on the bike.

    

Laitch

Laitch
Life time member
Life time member
lefthander wrote:Suggestion was made to describe the model k75 I have. Just giving all info on the bike.
Putting your moto's model, year and unique features information in the Signature section of your Profile will have it showing up beneath every post you make. That will help inform readers and prospective respondents to your posts.


__________________________________________________
1995 K75 90,000 miles
    

8Back to top Go down   Help wiring Navigator 3 to 92 k75 standard low seat Empty K75 gps hookup Mon Feb 18, 2019 7:24 pm

lefthander

lefthander
Silver member
Silver member
So I found the Nav 3 wiring harness that goes to the gps and the four button cradle.  Anyone happen to have the plug that it would plug into that gets wired to power from the bike?


__________________________________________________
1992 k75 standard low seat. (transforming into a K75T low seat). roundel
    

prince

prince
Silver member
Silver member
lefthander wrote:So I found the Nav 3 wiring harness that goes to the gps and the four button cradle.  Anyone happen to have the plug that it would plug into that gets wired to power from the bike?

Post a picture of it or take a look at the pic TWB posted.


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

lefthander

lefthander
Silver member
Silver member
In the picture I need the 2 pole connector. It's #9 in the top picture


__________________________________________________
1992 k75 standard low seat. (transforming into a K75T low seat). roundel
    

Two Wheels Better

Two Wheels Better
Moderator
Moderator
lefthander wrote:In the picture I need the 2 pole connector. It's #9 in the top picture
BMW part number 83 30 0 402 344 @ US$27.30


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

prince

prince
Silver member
Silver member
lefthander wrote:In the picture I need the 2 pole connector. It's #9 in the top picture
09Repair plug, 2-pinNo. 610619183300402344$27.30SI 75/2004


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

prince

prince
Silver member
Silver member
btw, BikeBandit sells that part for $15.31


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

lefthander

lefthander
Silver member
Silver member
Thanks for all the help. Once I get this plug I'd be greatful for help in wiring this up to my 1992 K75 standard.


__________________________________________________
1992 k75 standard low seat. (transforming into a K75T low seat). roundel
    

prince

prince
Silver member
Silver member
lefthander wrote:Thanks for all the help. Once I get this plug I'd be greatful for help in wiring this up to my 1992 K75 standard.

Generally, for BMW's red is positive and black is negative. The repair wire connector might have both wires as yellow (the one I used had all 3 wires yellow).

The Nav IV cradle I have has the wires coloured: red, black, yellow. It was easy to wire up. The Nav's seem to be polarity secure so if you get the polarity mixed up it will protect itself. But better safe than sorry.

Always use a fused power source. 3 amp is fine. You can use a regular automotive Bosch relay to make it a switched power (power to the gps only when the bike is turned on). I always get the trigger source from the tail light.


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

Two Wheels Better

Two Wheels Better
Moderator
Moderator
More specifically, ground or earth wires on German machines are typically brown.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

prince

prince
Silver member
Silver member
Two Wheels Better wrote:More specifically, ground or earth wires on German machines are typically brown.

Ah, yes....sorry ... North American convention is ground is black.


__________________________________________________
Paul
1984 Honda V65 Magna
1985 BMW K100RT
2011 BMW K1600GTL (gone)
2018 BMW K1600GTL
    

18Back to top Go down   Help wiring Navigator 3 to 92 k75 standard low seat Empty gps Tue Feb 19, 2019 5:06 pm

lefthander

lefthander
Silver member
Silver member
Thanks Laitch, I believe my bike description is there now.


__________________________________________________
1992 k75 standard low seat. (transforming into a K75T low seat). roundel
    

19Back to top Go down   Help wiring Navigator 3 to 92 k75 standard low seat Empty K75 gps hookup Thu Feb 21, 2019 4:55 pm

lefthander

lefthander
Silver member
Silver member
I found a wiring harness that plugs into the gps and the 4 button cradle with the cigarette lighter power source on the dash of my 1992 k75 standard for my Navigator 3. It was on ebay, from China  and says used, with the name Garmin on it. Anyway, because I am electrically challenged to put it mildly I've decided to go this route. Once I get it and verify it works, anyone who would like to have the harness I was going to use can have it for the cost of shipping. If there is room in your budget to donate anything to this sites donation place then that would be great. Again, thanks to all for your help.


__________________________________________________
1992 k75 standard low seat. (transforming into a K75T low seat). roundel
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum