BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


brickrider2

brickrider2
Life time member
Life time member
I bought a set of stainless steel brake hoses for my 1996 K1100LT.  I have a Haynes shop manual to guide the change out of the original, old hoses.  However, I know there can be errors in such publications, so I am turning to the experts here.  Are there any special tips I should follow in carrying out this work? Thanks.


__________________________________________________
1996 K1100LT
    

duck

duck
Life time member
Life time member
Here's a write-up I did on installing SS lines on a 94 K1100RS which you might find helpful:

http://dws.x10host.com/11tech/94-96_K1100RS_Galfer_Brake_Line_Install_V1.2.doc.pdf


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

brickrider2

brickrider2
Life time member
Life time member
That's exactly the sort of information I was hoping would surface here. Thanks Duck!   cheers


__________________________________________________
1996 K1100LT
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum