BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Water on the floor. Empty Water on the floor. Sun Sep 12, 2010 9:55 am

emilios

avatar
active member
active member
Hi..my K100RS 1988 run yesterday for first time after 6 years.
Everything was ok but today i notice few drops of water under the front of engine where oil/water pump is locate..
The water was coming out from that hole i show on the picture..
Any idea or i have to take off the pump and put new o-rings?
Thanks[img]Water on the floor. Sdc10414[/img]

    

2Back to top Go down   Water on the floor. Empty Re: Water on the floor. Sun Sep 12, 2010 12:17 pm

reg_K100RS

avatar
Silver member
Silver member
Emilios
You need a new water pump mechanical seal
you can buy them and/or kits from
motorworks or motobins in the UK if you do not have
any nearer suppliers.

Do a search and you'll see threads here on the process and some of our
experiences of doing it ourselves
Its quite easy to do but just as easy to bugger up Embarassed

    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum