BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Buy and Sell » Parts needed » C Spanner needed has grown legs or is champion at hide and seek

View previous topic View next topic Go down  Message [Page 1 of 1]

Matthew-Brisbane

Matthew-Brisbane
Life time member
Life time member
Hello 

Anyone have a spare C spanner for sale ?

    

BobT

BobT
Life time member
Life time member
Yes.

    

92KK 84WW Olaf

avatar
Life time member
Life time member
Unless you need it for the rear shock just mark a line on a spanner or screwdriver in your tool roll for measuring the gearbox oil level. Or write the depth inside one of the panniers/storage box covers/under the seat.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Rick G

Rick G
admin
admin
If you just need it for the dip stick then the measurements are here and if you make a dipstick make ABSOLUTELY you cant drop it into the gearbox DAMHIK.

C Spanner needed has grown legs or is champion at hide and seek C_span10


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

92KK 84WW Olaf

avatar
Life time member
Life time member
I have that picture saved and couldn't find it to post it/ But I have the 116mm dimension in my head too.

How do you get your rear wheel off? I found a wheel brace was needed and I have one in my kit marked......it cant fall into the gearbox.....

But the best advice is cut a plastic one and keep that on board. Plastic milk containers are good because they don't snap.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Dai

Dai
Life time member
Life time member
RicK G wrote:If you just need it for the dip stick then the measurements are here and if you make a dipstick make ABSOLUTELY you cant drop it into the gearbox DAMHIK.
Good fishing trip, was it Rick?


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Andrew2

Andrew2
Platinum member
Platinum member
I would like to publicly apologize for laughing out loud when I read that Rick Laughing .


__________________________________________________
1987 K100RS
    

Matthew-Brisbane

Matthew-Brisbane
Life time member
Life time member
Tell the story rick

    

Rick G

Rick G
admin
admin
Dai wrote:
RicK G wrote:If you just need it for the dip stick then the measurements are here and if you make a dipstick make ABSOLUTELY you cant drop it into the gearbox DAMHIK.
Good fishing trip, was it Rick?
It was on the R80 many moons ago and I used a small piece of stainless. I remember thinking that it would be damn difficult to get out if I dropped it and promptly dropped it into the box. Being 316 stainless it is almost non-magnetic so I ended up removing the gearbox but managed to get it out by tipping the box upside down and shaking it after washing it out with petrol. All in all it took more than a day and cost me a new clutch which I found it to be well worn.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Matthew-Brisbane

Matthew-Brisbane
Life time member
Life time member
Laughing

    

MartinW

MartinW
Life time member
Life time member
Mathew most aftermarket "C" spanners are too short to be successfully modified normally 6".
However this double ended one could be easily modified by carefully cutting the non appropriate shock adjuster off. then rounding off the end. the marks could be cut in either with a file or hacksaw.
https://www.ebay.com.au/itm/MOTORCYCLE-SHOCK-ABSORBER-SUSPENSION-SHOCKER-ADJUSTING-TOOL-C-SPANNER-WRENCH-AU/253117892460?hash=item3aef00876c:g:nAkAAOSw44BYPV4qC Spanner needed has grown legs or is champion at hide and seek Bmw_sh10

    

TacKler

TacKler
Life time member
Life time member
Um, Motobins have new ones for sale and Motorworks may have second hand ones  C Spanner needed has grown legs or is champion at hide and seek 652573


__________________________________________________
Red 1991 K75S
    

Dai

Dai
Life time member
Life time member
Can I ask the obvious question? If your gearbox doesn't leak and you put the correct amount in each oilchange (and you stick to the service intervals!), why the worry? Perhaps that's a bit naive but I've always ended up dumping just about all of what was put in at the previous oilchange. The only bike that did 'consume' gearbox oil was my Guzzi G5; the output shaft seal leaked slightly and did a damn good job of lubricating the UJ, so I never bothered fixing it.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Buy and Sell » Parts needed » C Spanner needed has grown legs or is champion at hide and seek

Permissions in this forum:
You cannot reply to topics in this forum