BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   MotoGadget m.Grip and m.Blaze Empty MotoGadget m.Grip and m.Blaze Tue Nov 21, 2017 10:37 pm

DBRMN

DBRMN
Life time member
Life time member
Just wanted to start thread on my experience with the m.Grip and m.Blaze from MotoGadget as I feel they are amazing upgrades for a K bike.

I started with the grips which were really easy to install and looked great, only tip would be don't tighten them too hard on the throttle side as it makes the throttle stiff and stick. In regards to the m.Blaze indicators my advice would be use the biggest bung that fits in you handlebar even if it fits really easily, I made the mistake of trying to force a tight fit bung as thats what the instructions recommended but this wasn't the right option. Next I am going to probably upgrade the handlebar controls by either restoring the OEM ones or buying more modern ones, so if you have any suggestions they would be much appreicated. Below are some pictures of the results:

MotoGadget m.Grip and m.Blaze P1020014
MotoGadget m.Grip and m.Blaze P1020013

Edit:

Don't buy the grips they don't actually fit lol.

Edit Part 2:

Im a muppet and they fit really well. The rubber grommets fit into a groove within the actual grip making them the perfect size and securely fitting them.



Last edited by DBRMN on Fri Dec 15, 2017 8:06 pm; edited 1 time in total

    

2Back to top Go down   MotoGadget m.Grip and m.Blaze Empty Re: MotoGadget m.Grip and m.Blaze Thu Nov 23, 2017 1:33 am

Bigsax

Bigsax
Gold member
Gold member
Great job!
At what point did you splice the indicator wiring? From the switches or further down?


__________________________________________________
MotoGadget m.Grip and m.Blaze Brick110
I stole this image, let me know if you want it back.
    

3Back to top Go down   MotoGadget m.Grip and m.Blaze Empty Re: MotoGadget m.Grip and m.Blaze Thu Nov 23, 2017 3:37 am

Laitch

Laitch
Life time member
Life time member
DBRMN wrote:. . . Next I am going to probably upgrade the handlebar controls by either restoring the OEM ones or . . .

Here is an example of a pretty good OEM restoration.


__________________________________________________
1995 K75 90,000 miles
    

4Back to top Go down   MotoGadget m.Grip and m.Blaze Empty Re: MotoGadget m.Grip and m.Blaze Fri Nov 24, 2017 10:21 pm

DBRMN

DBRMN
Life time member
Life time member
Bigsax wrote:Great job!
At what point did you splice the indicator wiring? From the switches or further down?
Literally just hooked it up straight from where I cut the indicator off. However all my wires are a bit untidy at the moment.

    

5Back to top Go down   MotoGadget m.Grip and m.Blaze Empty Re: MotoGadget m.Grip and m.Blaze Fri Nov 24, 2017 10:22 pm

DBRMN

DBRMN
Life time member
Life time member
Laitch wrote:
DBRMN wrote:. . . Next I am going to probably upgrade the handlebar controls by either restoring the OEM ones or . . .

Here is an example of a pretty good OEM restoration.
OMG that is absolutely amazing I think I am going to try and attempt something like that, thank you

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum