BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


floyd

floyd
Life time member
Life time member
Will the seat and tail section of a K1100 fit a K100 frame?

EDIT: And will the early K100 seat (with handles on seat) fit onto the later K100 tail sections (with handles on tail) if you remove the handles from the seat?


__________________________________________________
K100 with lots of K1100 bits - mongrel of a thing...
    

Stan

Stan
Life time member
Life time member
Part answer... pre 85 seat, with handles (even if handles removed) will not fit with tail of post 85. The tank, seat, footpegs tail are all different.


__________________________________________________
1983 K100 basic vin 0003960 colour red  GONE
1987 K100RT vin 0094685 colour, orange peel, sorry, pearl..GONE
F800R black
    

Rick G

Rick G
admin
admin
Will the seat and tail section of a K1100 fit a K100 frame? 
No, the K1100 has pins protruding from the tail piece to clip the sidecovers onto where the K100 has the pins on the sidecover.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

floyd

floyd
Life time member
Life time member
How about an 1100 seat on a post 85 100?


__________________________________________________
K100 with lots of K1100 bits - mongrel of a thing...
    

Rick G

Rick G
admin
admin
Yeah that will fit


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

duck

duck
Life time member
Life time member
RicK G wrote:Will the seat and tail section of a K1100 fit a K100 frame? 
No, the K1100 has pins protruding from the tail piece to clip the sidecovers onto where the K100 has the pins on the sidecover.

You can just break the pins off of the K1100 tail and drill holes.

The black rear fender/license holder mounts differently though which may or may not be an issue.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum