BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


timz10000

timz10000
Silver member
Silver member
About to try to fix my 1985 K100 - it starts cutting out after it's hot and won't start again (maybe 30 mins into riding).

What I've done:
- replaced the Hall Effect sensors
- replaced the rubber air intakes
- replaced internal and external fuel lines

My plan of action based on various advice I've gotten & reading the forums is:
- check exhaust valve clearance
- test temperature sensor
- see if my coils are the original black ones (if so I guess replace them - although the orange ones are expensive!)

Does that seem like a sound plan of action? Any other thoughts or advice?

    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
If you haven't, you definitely want to check valve clearance, especially the exhaust valves.

Check eBay for coils.  There can be some good deals there compared to buying new.  Having said that, it is odd that both coils would quit at the same time.  I think there is an ignition control module under the tank that may be giving you a problem.  I have no experience troubleshooting that.  Maybe someone else can help you there.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Rick G

Rick G
admin
admin
Did you replace the hall sensors with new or just use an old plate. Did you test the hall sensors because what you describe is absolutely classic of those things.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Michael Sydney

Michael Sydney
Silver member
Silver member
I see you have a bit of warm weather in Austin. Maybe worth putting fresh thermal transfer paste under the ignition module, that can be quite heat sensitive.


__________________________________________________
Living in the past! K100 '83 and R65 '83.
    

Crazy Frog

Crazy Frog
admin
admin
Point-Seven-five wrote: I think there is an ignition control module under the tank that may be giving you a problem.  I have no experience troubleshooting that.  Maybe someone else can help you there.
This was the exact problem of Jumpinjimmy.
When the engine was at temperature, the ignition module was cutting off its signal to the fuel injection computer.
When the engine was cutting off, the ignition was still working but the fuel injection was failing. The ICU was failing to send the proper signal (pin #8 ) to the EFI (pin #1).

The way we found it was by having a strobe light on one ignition lead and LEDs on the injector plug.
When the engine was ready to quit, the intensity of the LED on the fuel injector started to fade then stopped. At no point the strobe like had a miss.

Another question is: When the engine stop, if you cut the ignition, does it starts again or do you have to wait that it cool down?
If the engine start again, I would check the ignition switch.


__________________________________________________
Engine cutting out after 30 mins - what to test? Frog15Engine cutting out after 30 mins - what to test? Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML GT2 sidecar, 1999 K1200lt/Hannigan Astro Sport sidecar.
    

timz10000

timz10000
Silver member
Silver member
RicK G wrote:Did you replace the hall sensors with new or just use an old plate. Did you test the hall sensors because what you describe is absolutely classic of those things.

I did replace them with new sensors (that I put on the old plate). I soldered to the wiring harness by the sensor, is it possible the wires could get iffy when heated up by the tank?

    

timz10000

timz10000
Silver member
Silver member
Crazy Frog wrote:
Point-Seven-five wrote: I think there is an ignition control module under the tank that may be giving you a problem.  I have no experience troubleshooting that.  Maybe someone else can help you there.
This was the exact problem of Jumpinjimmy.
When the engine was at temperature, the ignition module was cutting off its signal to the fuel injection computer.
When the engine was cutting off, the ignition was still working but the fuel injection was failing. The ICU was failing to send the proper signal (pin #8 ) to the EFI (pin #1).

The way we found it was by having a strobe light on one ignition lead and LEDs on the injector plug.
When the engine was ready to quit, the intensity of the LED on the fuel injector started to fade then stopped. At no point the strobe like had a miss.

Another question is: When the engine stop, if you cut the ignition, does it starts again or do you have to wait that it cool down?
If the engine start again, I would check the ignition switch.

When it cuts out I can usually start it again a time or two, and then it seems to run when revved high but cuts out when revs drop. Then it will cut out and not start again until it has been fully cooled down.

    

duck

duck
Life time member
Life time member
My guess is coils. YMMV


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

timz10000

timz10000
Silver member
Silver member
duck wrote:My guess is coils. YMMV

A couple coils questions:

Is there any way to test coils, or does one just get replacements and pop 'em in and see if it fixes the problem?

    

duck

duck
Life time member
Life time member
If you look up the K100 troubleshooting PDF it has some resistances to test on K100 coils.

Not sure if that relates directly to your issue though.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

Crazy Frog

Crazy Frog
admin
admin
Without ruling off the coils, I would more be inclined to test the water temperature sensor before replacing the coils.


__________________________________________________
Engine cutting out after 30 mins - what to test? Frog15Engine cutting out after 30 mins - what to test? Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML GT2 sidecar, 1999 K1200lt/Hannigan Astro Sport sidecar.
    

duck

duck
Life time member
Life time member
The idiot light should illuminate and then the radiator cap should blow before it shuts down. (Does the L-Jet have a temp-based shutdown programmed into it?)

The reason I guess coils is that a local guy had the shut down when it gets warm issue on his 85 and after I swapped in a set of coils that cured it.


__________________________________________________
Current stable:
86 Custom K100 (standard fairing, K75 Belly pan, Ceramic chromed engine covers, paralever)
K75 Frankenbrick (Paralever, K11 front end, hybrid ABS, K1100RS fairing, radial tires)
86 K75C Turbo w/ paralever
94 K1100RS
93 K1100LT
91 K1
93 K75S (K11 front end)
91 K75S (K1 front end)
14 Yamaha WR250R
98 Taxi Cab K1200RS
14 K1600GT
http://www.ClassicKBikes.com
    

JR_K100RS

JR_K100RS
Life time member
Life time member
Hello All , my bike had a cutting out problem as well in severe heat , it turned out to be loose battery cables expanding in the heat , worth a look

John Re

Melbourne Australia


__________________________________________________
Diamond Grey ( 617 ) 1987 K100RS ( European Delivery ) Original owner
    

92KK 84WW Olaf

avatar
Life time member
Life time member
duck wrote:The idiot light should illuminate and then the radiator cap should blow before it shuts down. (Does the L-Jet have a temp-based shutdown programmed into it?)

The reason I guess coils is that a local guy had the shut down when it gets warm issue on his 85 and after I swapped in a set of coils that cured it.

The 2v Ks don't have shut down on overheat. All they have is that overheat prevents a restart until the engine cools down. I do wonder that because I overheated the 92 LT one day in traffic and it restarted with no problem.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Rick G

Rick G
admin
admin
111°C is when the light comes on and 113°C is when it wont restart. If you shut it down when the light comes on the radiator will thermo syphon due to cooler coolant in the radiator and the engine probably will even out in temp in a fairly short time and not get to the 113°C mark.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

timz10000

timz10000
Silver member
Silver member
Crazy Frog wrote:Without ruling off the coils, I would more be inclined to test the water temperature sensor before replacing the coils.

You're talking about this sensor right - http://www.euromotoelectrics.com/TEMPSENS-K197-p/tempsens-k197.htm 

(and not the in-the-radiator valve...)


__________________________________________________
1985 K100
    

Crazy Frog

Crazy Frog
admin
admin
timz10000 wrote:You're talking about this sensor right - http://www.euromotoelectrics.com/TEMPSENS-K197-p/tempsens-k197.htm 
(and not the in-the-radiator valve...)
Yes this is the water temperature sensor.


__________________________________________________
Engine cutting out after 30 mins - what to test? Frog15Engine cutting out after 30 mins - what to test? Logo2101986 k75, 1985 K100rt, 1985 K100rt/EML GT2 sidecar, 1999 K1200lt/Hannigan Astro Sport sidecar.
    

MartinW

MartinW
Life time member
Life time member
I've successfully tracked down heat related problems by using crushed ice wrapped in a cloth used in conjunction with a heat gun. Once the bike cuts out pack crushed ice around suspect parts and see if it starts up if it does then hit the part with a heat gun. Keep trying various suspects until you find it. You can also try using Freeze spray instead of the ice.
Regards Martin.

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum