1 EML shock absorber rebuild Thu May 07, 2015 7:35 am
jef_k75
active member
1 shock absorber on my EML K100 HW1 was leaking, i am rebuilding it, more pictures and parts will follow, this is the tool i made to release the spring preload, it was not possible to turn it with the supplied tool as it is only about 2mm aluminium plate
still had to put some force on it to get it moving
it fits 4 pins, there are 2 pins in position in the picture, i have glued these in, i could make a drawing with dimensions if someone is interested
still had to put some force on it to get it moving
it fits 4 pins, there are 2 pins in position in the picture, i have glued these in, i could make a drawing with dimensions if someone is interested
__________________________________________________
"the best things in life are dirty"