BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Seal repair

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   Seal repair Empty Seal repair Mon Aug 04, 2014 7:48 pm

RT

RT
Life time member
Life time member
Seal repair Imgp0211
Let nobody say I didn't get my hands dirty.
Seal repair Imgp0212
The culprit, and I thought it had stopped leaking.
Seal repair Imgp0212
Whooops, just in case you missed it
Seal repair Imgp0214
RT does not only make scones.
Thanks to Rosskoe for turning up and forcing me to actually do something.


__________________________________________________
2011 R1200RT
    

2Back to top Go down   Seal repair Empty Re: Seal repair Mon Aug 04, 2014 8:02 pm

Stan

Stan
Life time member
Life time member
Tha Rossko does cause issues....


__________________________________________________
1983 K100 basic vin 0003960 colour red  GONE
1987 K100RT vin 0094685 colour, orange peel, sorry, pearl..GONE
F800R black
    

3Back to top Go down   Seal repair Empty Re: Seal repair Mon Aug 04, 2014 8:37 pm

88

88
Life time member
Life time member
Bummer to have to go in there twice RT.


__________________________________________________
Seal repair Ir-log1188....May contain nuts!Seal repair Ir-log11

"The world is a book and those who do not travel read only one page." - St. Augustine from 1600 years ago & still true!

K1 - 1989 - AKA Titan (unique K1/K1100RS hybrid by Andreas Esterhammer)
K1100RS - 1995. AKA Rudolf Von Schmurf (in a million bits)
K100RS - 1991 AKA Ronnie. Cafe racer project bike
K75RTP - 1994
K75C - 1991 AKA Jim Beam. In boxes. 
K1100LT 1992 - AKA Big Red (gone)
K100LT - 1988 - AKA the Bullion brick. Should never have sold it.
    

4Back to top Go down   Seal repair Empty Seal repair Tue Aug 05, 2014 12:15 am

RT

RT
Life time member
Life time member
Worse still 88K, of course you get a good look at the friction plate. Wafer thin, so I'll be back in there again again before too long.


__________________________________________________
2011 R1200RT
    

5Back to top Go down   Seal repair Empty Re: Seal repair Tue Aug 05, 2014 12:19 am

rosskko

rosskko
VIP
VIP
RT is having a 2 for 1 weekend.

Replacing 2 clutch plates in one day.

I might let him practice on his bike first.

Good weekend and a job well done. Time consuming, but easy. And rewarding.

Even if there was some 'overuse' of the torque wrench.
Honestly, who torques up their wheel bolts?


__________________________________________________
1986 K100RT VIN 0093801K100RT with summer fairing for a northern visitor

Basic/2 6308802K100CJ  05/1988

K1100RS 0194321
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Engine and transmission » Seal repair

Permissions in this forum:
You cannot reply to topics in this forum