BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Front brake master cylinder query (2v K100/75)

View previous topic View next topic Go down  Message [Page 1 of 1]

mhsilverw

mhsilverw
active member
active member
Hi,
Will a K75/100 front brake master cylinder (from an ABS bike) work on a non ABS machine?
Will it bolt straight on?

Regards
Mark

    

Comberjohn

Comberjohn
Life time member
Life time member
I've had both types and there's no obvious difference between them.
Unless anyone else knows better?
Don't use a 16v master cylinder! They are very different.


__________________________________________________
Life is not a rehearsal.
2010 VFR 1200F DCT 
2010 R1200GS(gone)
1986 K100 Silver(gone)
2012 K1600GT(gone)
1984 K100RT Madison Silver(gone)
1989 K100LT Stratus Grey(gone)
1984 K100 Red(gone)
http://www.johnsdrivingschool.co
    

mhsilverw

mhsilverw
active member
active member
Comberjohn wrote:I've had both types and there's no obvious difference between them.
Unless anyone else knows better?
Don't use a 16v master cylinder! They are very different.

Thank you so much for that, appreciated.
Regards
Mark

    

Inge K.

Inge K.
VIP
VIP
ABS models have a different piston and lever, don't see any reason that it
shouldn't function on a non ABS.
If using non ABS master parts on a ABS model could end up with problems.


__________________________________________________
Inge K.
K100RS -86. (first owner), K1100LTSE -94.
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Frame, fairing and wheels » Front brake master cylinder query (2v K100/75)

Permissions in this forum:
You cannot reply to topics in this forum