Mate, here are a few ideas that should get you out of trouble.
Step 1. Find a Ford wrecker.
Step 2. Read below.
Quote from Rick
The pump I am using in mine is an after market for a EA EB ED Falcon Multi point Sedan. Those cars run an L Jetronic system as do many other cars of the era
If you get a pump for an EA Falcon sedan with multipiont injection and use a big zip tie and pull it real tight it works like a charm and I got one on fleabay for $45. You need to change the connectors to the push on spade terminals.
The fuel pressure is 32 -33psi
Quote from Rendrag
Bit late to the thread, but just watned to add (since this thread comes up on ebay every time I search
), that in AUstralia, these fuel pumps (readily available at most parts stores) are almost a drop-in replacement for the K100 fuel pump (Note: the 52mm one, not the smaller..)
AC-Delco EP118AU
Goss GE053
Fuel Miser FPE-287.
I dropped the Fuel Miser variant into the bike this evening - $125 from repco. It's 51mm instead of the 52, so i cut a length of fuel hose into 4, and used two of them wrapped around the fuel pump where the 'lumps' are on the OEM one, and it all fitted up beautifully