How do you access the handlebar bolts k100rs

madmart · 1 How do you access the handlebar bolts k100rs Tue Jul 31, 2012 6:32 am

madmart

New member

Number of posts : 4

Can someone tell me how to remove the rubber cover on the handlebars so I can access the top of the fork tubes? I can't see any bolts anywhere.

Rick G · 2 Re: How do you access the handlebar bolts k100rs Tue Jul 31, 2012 6:58 am

Rick G

admin

Number of posts : 12058

Under the pad at the reat there are two small bolts that go into the top tripple clamp, they will be either 10mm hex head or 5mm socket head.

madmart · 3 Still cant find them Tue Jul 31, 2012 9:04 am

madmart

New member

Number of posts : 4

I have had a good look and can't see or feel any bolts. I just want to be able to top up the fork legs. Do you have to take off the brake and clutch lever, or can it be done any other way?

Thanks

Martin

blaKey · 4 Re: How do you access the handlebar bolts k100rs Tue Jul 31, 2012 10:28 am

blaKey

Life time member

Number of posts : 2756

Have a look under the lower side of the pad (the upper side is near the instruments, the lower side is near the fuel tank). You have to bend the pad up a bit to see the bolts.

There are 2 bolts as described by Rick G.

madmart · 5 Thanks Tue Jul 31, 2012 3:02 pm

madmart

New member

Number of posts : 4

Found them. I was looking for bolts that went vertically into the rubber.

Thanks for all your help

Sponsored content

1 How do you access the handlebar bolts k100rs Tue Jul 31, 2012 6:32 am

madmart

2 Re: How do you access the handlebar bolts k100rs Tue Jul 31, 2012 6:58 am

Rick G

3 Still cant find them Tue Jul 31, 2012 9:04 am

madmart

4 Re: How do you access the handlebar bolts k100rs Tue Jul 31, 2012 10:28 am

blaKey

5 Thanks Tue Jul 31, 2012 3:02 pm

madmart

6 Re: How do you access the handlebar bolts k100rs

Sponsored content