BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Showa rear spring from a K1100 Empty Showa rear spring from a K1100 Thu Apr 26, 2012 3:07 pm

bjarnek100

avatar
active member
active member
Hi all



Would a Showa rear spring from a ´96 K1100RS fit a ´90 K100RS with Paralever? What should the measure be , center-center?

TIA :-)

Bjarne

    

2Back to top Go down   Showa rear spring from a K1100 Empty Re: Showa rear spring from a K1100 Thu Apr 26, 2012 5:04 pm

Tony Kirov

Tony Kirov
active member
active member
Hi Bjarne,
If K100 is originaly with Part No. 33532312257everithing will be fine.
Showa is mounted to bikes manufactured after 08/1991.

http://www.realoem.com/bmw/partxref.do?part=33532312257

Actually it is the same shock


__________________________________________________
Showa rear spring from a K1100 2854237993 BMW K100RS 4-VALVE (89V1) VIN#0205126 08/1991 ECE Showa rear spring from a K1100 2854237993
    

3Back to top Go down   Showa rear spring from a K1100 Empty Re: Showa rear spring from a K1100 Thu Apr 26, 2012 8:29 pm

Rick G

Rick G
admin
admin
The K1100 is 380mm c-c and a K1002V is 350mm c-c the 1100 and K100RS paralever are the same.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum