BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Pulsating front brake Empty Pulsating front brake Sat Apr 14, 2012 3:41 am

bjarnek100

avatar
active member
active member
Hi all

I sometimes get a "pulsating" feel in the front brake handle when breaking at low speed, f.x. by slowly rolling to a stop and slightly braking? At high speed, there is no problems/pulsation. Bike´s a 16V with ABS. Front and rear ABS is fully functionally. My own suspects is that the floating disc is a bit "too floating" (feels very loose, compared to other floating discs). Could this cause the brake disc itself to pulsate? Any advise please :-)....

regards

Bjarne

    

2Back to top Go down   Pulsating front brake Empty Re: Pulsating front brake Sat Apr 14, 2012 4:49 am

Two Wheels Better

Two Wheels Better
Moderator
Moderator
The 'bobbins', those round things that allow the disc to 'float' are prone to wear on that model. Grab the disc and rock it back and forth and if they're worn there will a pronounced rattle present. This could contribute to a pulse of sorts, especially at low speed. They are replaceable but not particularly cheap. Motobins - and others - stock replacements. It might be a good idea to see if the discs are out-of-round as well. This will be more of an issue at slower speeds but would be felt at any speed.


__________________________________________________
"How many cars did we pass today?" "ALL of them."
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum