BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Electrical » hi, out there...

View previous topic View next topic Go down  Message [Page 1 of 1]

1Back to top Go down   hi, out there... Empty hi, out there... Sun Feb 12, 2012 11:26 am

kingtorben

avatar
New member
New member
I'm very happy for my k100rt. But there is a small problem. Some of the tackometers on the k100 bikes, begin the "red area" amound 6500 rpm (as mine) and some at 8500 rpm. But the engines are the same....???? anyone got an answer for that....? I Could not find anything on the net about it....
Thangs for the best k-forum ever....(;-))

    

2Back to top Go down   hi, out there... Empty Re: hi, out there... Sun Feb 12, 2012 12:06 pm

Inge K.

Inge K.
VIP
VIP
The 6500rpm models was deposited to owners that passed the age of 50 at the date of purchase. Laughing Laughing

Swiss models (that is limited to 79 hp) got this tacho.

Inge K.



Last edited by Inge K. on Sun Feb 12, 2012 12:37 pm; edited 1 time in total

    

3Back to top Go down   hi, out there... Empty Re: hi, out there... Sun Feb 12, 2012 12:15 pm

Oldgoat

Oldgoat
Life time member
Life time member
hi, out there... 44271

    

4Back to top Go down   hi, out there... Empty Re: hi, out there... Mon Feb 13, 2012 8:18 am

Agerbundsen

Agerbundsen
Silver member
Silver member
So, Torben, was your K100 originally from Switzerland or has the tacho been replaced at some time?

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Electrical » hi, out there...

Permissions in this forum:
You cannot reply to topics in this forum