BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   Powder Coating my Frame Empty Powder Coating my Frame Tue May 08, 2012 12:05 pm

rosskko

rosskko
VIP
VIP
As mentioned a few days ago I am planning on stripping the old girl and adding a bit of paint and polish.
I have a quote to soda blast the frame and powder coat it black for $550.
My question is, is it worth it.
soda blast only is $250

Thanks

ross

    

2Back to top Go down   Powder Coating my Frame Empty Re: Powder Coating my Frame Tue May 08, 2012 5:18 pm

twincarb

twincarb
Life time member
Life time member
I know that comparing prices for a "service" between contries isnt the best thing, but it only cost me approx $200AU for me to get my frame, fairing bracket, and loads of other parts powder coated, I know they didnt soda blast them but sand blasted it.

I am happy with the end result apart from i think they applied the powder to thick!

    

3Back to top Go down   Powder Coating my Frame Empty Re: Powder Coating my Frame Tue May 08, 2012 8:33 pm

blaKey

avatar
Life time member
Life time member
$550 isn't too outrageous.
Are you after a general tidy-up or heading towards concourse?


__________________________________________________
Neil
K100RS 1986 RED!

Dress for the ride and the potential slide.
    

4Back to top Go down   Powder Coating my Frame Empty Re: Powder Coating my Frame Tue May 08, 2012 8:37 pm

rosskko

rosskko
VIP
VIP
Concourse? isn't that a plane that crashed a few years ago?
Just cleaning it up. The soda clean is $250. I figured if they can paint it for 300 more then meh.
However if the 2 pac option is just as good then I will go with that. I have a mat with a spray booth so it would only be the cost of the paint.
Just figured powder coat would be a lot better.

rossco

    

5Back to top Go down   Powder Coating my Frame Empty Re: Powder Coating my Frame Sun May 20, 2012 8:34 pm

K75cster

K75cster
Life time member
Life time member
Rossco I'd talk to the mate with the spray booth,he might say differently,but I reccon $550 for an aussie to do it is ok its not a chinese import so it should be a sensable price. Just remember the compliance plate with the job done properly it should be lifted off and put back on nice and clean. powder coat can leave you with a very clean looking frame, your mate would know of any short falls for this stuff, but most pool fences still look good after the treatment they get each year. Might be the go mate


__________________________________________________
Keith - 1987 K75c with r100rt replica fairing and half of a 1984 K100rt 1992 K1100LT a blue one

The Clever are adept at extricating themselves from situations that the wise would have avoided from the outset - QUOTE from david Hillel in Out of the Earth.
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum