BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   No juice going to injectors Empty No juice going to injectors Sat Sep 14, 2024 10:48 pm

letsgetpractical

letsgetpractical
active member
active member
there is no signal going to injectors.  Checked fuses, relay, fuel rail has good pressure.  What wires/ component failure could cause this?


__________________________________________________
I own a 1985 KRT 100 Bmw
    

2Back to top Go down   No juice going to injectors Empty Re: No juice going to injectors Sun Sep 15, 2024 1:12 am

Rick G

Rick G
admin
admin
The injectors should have power to them at all times, the firing is regulated by a ground pulse from the ECU. If you are using a digital meter the length of the ground pulse is not long enough to register a reading. the pulse is measured in micro seconds.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum