Hi guys,

I'm looking forward to gather some more information on these bikes. I'm currently rebuilding my K75 to be something more suited to my style. I know it's not a K100 but since they share a lot of stuff I think this forum will be very helpfull.
The exhaust and most of the frame adjustments have been done and I'm now in the process of sorting out the electronics. The plan is to design and 3d print a dashboard including a GPS speedometer and, if possible, some of the original stuff like the clock and gear indicator. Maybe also a tachometer but it's not a necessity for me.

I drove it for about 15 to 20k km before chopping stuff off, mostly commuting but also a nice ride through Europe.
Can't find the original pictures so these will have to do for now;





and this is it's current state;






No worries, I gave away all the original parts that I won't be using to members of a K bike enthusiast club over here in The Netherlands.

Hello from Annapolis Md. Good luck with the build!

Tried out a few different speedometer bracket designs, this is the one I like the most. Need to reduce the angle a bit though.

Welcome Rudi

All K75, 100 and 1100 are welcome here

I Did a K75 Cafe build a couple of years ago.
The integration of the older analog signals for speedo, fuel gauge and gear indicator was the trickiest part of the whole build. Got there in the end, but it took a fair bit of help from others who had been there and done that before. Greetings from New Zealand.

Quiltzig wrote:I Did a K75 Cafe build a couple of years ago.
The integration of the older analog signals for speedo, fuel gauge and gear indicator was the trickiest part of the whole build. Got there in the end, but it took a fair bit of help from others who had been there and done that before. Greetings from New Zealand.

I'm hoping to make something work with the board robmack is making. Thinking about hooking that up to an Arduino, displaying it all on a round screen and 3d printing an enclosure for it. If I can get it to work I can share the 3d model and code on this forum if anyone wants it.



Took a better pic last weekend