A few of the K Kronies have work that they require assistance with. So I'm thinking of doing it on a Sunday so as to include the unfortunate Kronies that have to work to support our retired lifestyles. So I need a proposed date and a list of Kronies attending and the jobs they require assistance with and who can assist. Due to Micks complaint " What sausage rolls again" they are off the menu. KRSVP
Regards Martin.

I think I am being punished for the Admirals crimes....

Happy for the rolls and a chat any Sunday

Jamie you can have Mick's do you require any work.
Regards Martin.

Yes I am keen.  Any Sunday is good for me except the 31st Oct as it is the long weekend.  Would love to get the low fuel light on my dash working again if time permits please.   Regards Bruce

I should be available to assist in menial tasks should needs arise

Some of the K Kluster needing help? Hmm....never a truer word spoken 

Regards

Dan

At this stage I have a list of Kronies and work required.
1/ Matt needs his front wheel checking with dial gauge and possibly try some one else's front wheel  and also needs his exhaust gas analysed.
2/ Mick requires throttle and clutch cables changed over.
3/ SSD requires centre stand end plug grease nipples fitted which requires drilling and tapping and a running light swap over. Besides connecting the light he can do most of it himself.
4/ Bruce requires a battery isolation switch fitted and a low fuel light globe possibly changing.
I have all the necessary tools however any assistance with doing these jobs will be greatly appreciated.
Regards Martin.

Planned date of the workshop is 14th of November unless Kronies have other commitments.
Regards Martin.

Will be there to assist where required.

Won't be needing any work done on my bike. Will have the cables sorted by then...definitely..maybe...probably.

Looking forward to it.

Pretty sure Jamie wanted to benchmark his throttle balance against your tuner.....Possibly he would appreciate an exhaust gas analysis if you are keen to get your probe out

Thanks Mick, Matt might want to try your front wheel depending on what we find. I can definitely check Jamie's gas output reading if he wants. 
Regards Martin.

Slow responses from me at the moments (heaps going on  )

Would like to check the gases if we get time.

I put the sync er thingy on it yesterday and it def made a difference to how smooth the idle is. Need to try it against Martin's Sync er thingy.

Cheers Jamie

Sound good.   I will mark that in my diary.  It will give my Annie time to make the sausage rolls.   
Regards Bruce   

Thanks Bruce, tell Annie thankyou very much. Mick however won't be requiring any.
Regards Martin.

I had in my head it was this weekend and I was right to go, but it is actually the weekend after and I won't be able to make it.

Sorry to hear that Gary.  Hope you have just as much fun.  Lol.   All the more Sausage Rolls for Martin.

I will be bringing the new syncy thing and we can check everybodies throttlebody sync's.

At the moment we have the following Kronies attending Matt, Mick, SSD, Dan, Bruce, Jamie, Vic. If I've missed anybody else that is attending please let me know and what if anything needs doing.
Regards Martin.

Sounds great Martin.

Regards Bruce

What time are we all invading Martin's place ?

I looked above but could not see a time, maybe there is one maybe not

Thanks Jamie

Anytime from 0800.
Regards Martin.

Sausage Rolls cooking as we speak.

Yummmm

Mmmmmm thought I could wait till lunch time, but won't be able to now.

Dave you are most welcome to attend. We'll even set aside some goodies, what time do you reckon you can get here. Piccies of goodies to come.
Regards Martin.

When I see the piccies I'll put a few in the air fryer, then I'll get the smell and the taste too. And I'll have some dimmies which is ultimate, you can't get them in some countries.

Workshop day done and dusted  Matt had a couple of spacers machined up for his chook chaser. Matt  forgot to bring his bike so we couldn't check his wheel run out. SSD had his stand removed the internals cleaned and rustproofed  and then drilled tapped and fitted with grease nipples and refitted with assistance from Dan. Jamie also replaced SSD's  running light. Bruce had a battery isolator switch fitted by Matt. Bruce's tank was removed and the sender removed and checked by Jamie and myself. The windings were worn and only working through half the range. However after a bit of disassembly and cleaning and after reassembly the low fuel warning light came back to life. As he doesn't have a fuel gauge this is fine. Mick changed his own spark plugs and had his balance checked by Jamie with his new machine. He also checked Dan's and Bruce's balance. We tried getting a reading on Jamie's bike with the exhaust gas analyser but after heaps of adjustment it failed to make much of a difference Jamie's going to dive a bit further later on. Vic had his coils checked by Matt. Bruce's wife Annie supplied homemade sausage rolls and chocolate fudge which went down a treat. I believe it was another successful workshop.
Regards Martin.  

More piccies.

Bonus, good work, and a perfect excuse to pig out a bit. 

I've sometimes thought about welding an oxygen sensor to a pipe as a home made exhaust analyser, dunno if that'll work. It's been on the to-do list for a couple of decades.

Very productive morning.

Thanks for the invite.

Very good morning with lots of fiddly little jobs attended too. Good to have a few extra hands/heads around.

A few more pics.



The fellas in action



Studying the form guide..

Great day tinkering, almost 100% success on most jobs oddly enough 

Many thanks to the generous hosts & caterers (wink wink Martin/Bruce) all were well fed indeed



Genius at work...turning up "thingys" of some sort



Many hands make confusion



Even my old bus got in synch'



Mick's RS got new plugs - can't you tell?

And BTW Mick I was scratching my nose I tells ye   

Regards

Dan

Thanks for organising that workshop day Martin.   We got so much achieved in just the 5 - 6 hours.  Thanks for your and Jamie's help with my fuel sender.   Great banter, great company and food.   Thanks again.   Sorry no photos taken by me this time.

Regards Bruce