BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   ABS 1 (2.5 Board 16 v) Empty ABS 1 (2.5 Board 16 v) Fri May 10, 2019 5:30 pm

Ringfad

Ringfad
Life time member
Life time member
I dismantled a non functional one to see if I could see anything wrong. 1980's electronics in all it's red tinged glory.

It is all painted with some sort of red varnish.

I had tried to reset etc but no joy and do not need to get this one repaired.

I do have some spare unit's but thought you might be interested to see what is in there.



ABS 1 (2.5 Board 16 v) Two_bo10

ABS 1 (2.5 Board 16 v) Board_10

ABS 1 (2.5 Board 16 v) Board_11


__________________________________________________
ABS 1 (2.5 Board 16 v) Ir-log10

 ;BMW; K1 Black 1993 60K Km     ;BMW;  K1100RS Black 1996       ;BMW; K1 Blue 1990 25K Miles

 ;BMW; K1200RS Red
    

2Back to top Go down   ABS 1 (2.5 Board 16 v) Empty Re: ABS 1 (2.5 Board 16 v) Fri May 10, 2019 8:25 pm

Laitch

Laitch
Life time member
Life time member
At least the prawns look well-cooked. cheers


__________________________________________________
1995 K75 90,000 miles
    

3Back to top Go down   ABS 1 (2.5 Board 16 v) Empty Re: ABS 1 (2.5 Board 16 v) Fri May 10, 2019 9:23 pm

Dai

Dai
Life time member
Life time member
CMOS technology... I see a few CD4011 NAND gates (known for dying when you look at them), a few op amps, a few X-NOR gates and what appear to be a couple of counters. I'd put money on one or more of the CMOS gates being dead.


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum