1
Caliper half torque settings Sat Apr 27, 2019 5:14 am
tinyspuds
Life time member
Morning all,
Just split, cleaned, and replaced the seals in front and rear calipers (TBH, Spuds 2 : Brembo 1. No inducement would free 1 of the front bleeders and I ended up cracking the case with a reverse threader
).
Still very much a job worth doing as the muck, corruption and stuck pistons have benefited from the attention.
Does anyone know the recommended torque setting for the half bolts. Searched all around but can’t find it. I’ll run with a low 20 ft/lb unless someone can advise.
Cheers, Stu
Just split, cleaned, and replaced the seals in front and rear calipers (TBH, Spuds 2 : Brembo 1. No inducement would free 1 of the front bleeders and I ended up cracking the case with a reverse threader
).Still very much a job worth doing as the muck, corruption and stuck pistons have benefited from the attention.
Does anyone know the recommended torque setting for the half bolts. Searched all around but can’t find it. I’ll run with a low 20 ft/lb unless someone can advise.
Cheers, Stu
__________________________________________________
1985 BMW K100RT + Hedingham HUB and LL’s. VIN 0028106.
1986 K100RS in boxes. VIN 0141918.
1954 Royal Enfield 350 Bullet. Original.
2000 Hayabusa with Charnwood chair, Wasp forks and EZS wheels.
K1 Black 1993 60K Km 
