BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


MartinW

MartinW
Life time member
Life time member
Quite awhile ago I believe somebody in OZ came up with an aftermarket replacement universal joint. Can anybody come up with a part number or a vehicle that the joint comes out of.
Regards Martin.


__________________________________________________
1992 K75s
    

Packo

Packo
Silver member
Silver member
The original is : K5-A766 available from Hardy Spicer approx. $120 AUD
This is for K100 not sure if K75 use the same, too lazy to look it up
Munich also sell one with a grease nipple, $140 from memory, but it requires a slight yoke modification to fit it


__________________________________________________
______________
 
83 K100 HRD Outfit
1992 K1100 Outfit
2003 R1150 GSA Outfit
1983 K100 Basic
    

Packo

Packo
Silver member
Silver member
I think the alternative was one out of a Mercedes steering box but I don't think it was as heavy duty as the original


__________________________________________________
______________
 
83 K100 HRD Outfit
1992 K1100 Outfit
2003 R1150 GSA Outfit
1983 K100 Basic
    

charlie99

charlie99
VIP
VIP
smithy showed me  2 different variations of that uni joint

apparently they are common parts  and under 50 each...  sorry don't have the part numbers to hand

some variations can be problematic at installing because the way they are fitted ...to the novice, like me at least


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

Tom G

Tom G
Life time member
Life time member
Hi Martin,
The UJ on my soon to be completed 86 K100 was replaced a few months ago. The UJ joint was obtained from CBC bearings. Smithy has one of these UJ's and he may provide the numbers for you. The cost of these items were about $34.00 at the time.
Hope that helps.
Cheers
Tom


__________________________________________________
1986 K100RT Ex Police (Slightly modified)
2010 Suzuku DL650 V Strom
1992 R100R
    

charlie99

charlie99
VIP
VIP
Drive shaft universal joint replacement part number. 112350


__________________________________________________
cheezy grin whilst riding, kinda bloke ....oh the joy !!!! ...... ( brick aviator )

'86 K100 RT..#0090401 ..."Gerty" ( Gertrude Von Clickandshift ) --------O%O
'86 k100 rs.. #######..  "Fred " (f(rame) red ) ( Fredrick leichtundschnell ) - -
bits and pieces from many kind friends across the k100 world ...with many thanks ..
1987 k100rs ########   "Red"  - (red sports rs TWB style )
1989 K100rt #009637   "Black Betty"  (naked rt ala Nigel , now sporting an rs main fairing )
    

MartinW

MartinW
Life time member
Life time member
Thanks fellas it's not for me it's for one of our US inmates.
Regards Martin.


__________________________________________________
1992 K75s
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
Martin, thanks for posting.  I will be watching this thread with interest as a friend is looking for a front u-joint for a 16V K100RS drive shaft. 

It appears that R-bike owners replace these joints and mention the joints they use.  We're not sure if the joints are the same across different models'.  My friend is also concerned that a garden variety joint can't handle the high rpm operation.  He keeps mentioning how often he had to change the joints on the PTO shafts that drive his agricultural equipment.  He says those shafts usually run at 500-600rpm vs the 3000+ that our drive shafts run at cruising speed.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Packo wrote:The original is : K5-A766 available from Hardy Spicer approx. $120 AUD
This is for K100 not sure if K75 use the same, too lazy to look it up
Munich also sell one with a grease nipple, $140 from memory, but it requires a slight yoke modification to fit it
The Z20 (spline) complete driveshaft is the same between K75 & K100-8V variants, part number 26 11 1 454 063.



Last edited by Two Wheels Better on Mon Nov 05, 2018 2:18 pm; edited 1 time in total


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
Any number for a Paralever u-joint?


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

MartinW

MartinW
Life time member
Life time member


__________________________________________________
1992 K75s
    

smithy

smithy
Life time member
Life time member
As Tom has mentioned above the UJ we used is a hardy Spicer, part number > K5-A702


__________________________________________________
87 K100rs : Vin 9462 
86 K100rt : Vin 9901
Naked
98 K1100lt: Vin 8044
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
Does that K5-A702 work in Paralevers?


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Rick G

Rick G
admin
admin
Point-Seven-five wrote:Does that K5-A702 work in Paralevers?
AFAIK they are the same. Its midnight here and the monsters are outside so when it's light I'll have a look. Very Happy


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
K5-A702 seems odd.  The Hardy Spicer catalog notes the K5-A766 application as "staked BMW Motorcycle".  The A702 is described as "staked steering".

The A766 is listed as 19mm x 44mm while the A702 is 19mm x 48mm.

http://www.bearing.net.au/wp-content/uploads/2014/10/Universal-Joints.pdf

Judging from the results sourcing these joints, finding a place to buy them will be a bit of a chore.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

smithy

smithy
Life time member
Life time member
That's right, there is two different size UJ that fit the mono lever. believe me I know, both those will fit depending on the one you have.


__________________________________________________
87 K100rs : Vin 9462 
86 K100rt : Vin 9901
Naked
98 K1100lt: Vin 8044
    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
The shaft in question is from a Paralever with two u-joints.  In a couple weeks we'll be pulling it out and measuring to confirm the size.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum