BMW K bikes (Bricks)


You are not connected. Please login or register

K100-forum.com » Technical, repair and troubleshooting » Special tools and jigs » Just bought 85 K100 ' LT ' -tool question

View previous topic View next topic Go down  Message [Page 1 of 1]

ForedeckYoda

ForedeckYoda
New member
New member
Hello everyone.

q: do I need to get a ratcheting wrench set that includes the 19mm?   What on the K bikes is more than 18 mm?

    

Point-Seven-five

Point-Seven-five
Life time member
Life time member
I can't think of anything on the bike that takes a 19mm wrench.  The shock mounts are 18mm or 3/4" if that's what you have.  The swing arm and steering head use large wrenches as well as the clutch nut.


__________________________________________________
Present: 1991 K100RS "Moby Brick Too"
 
Past:
1994 K75RT "Ilsa, She Wolf of the SS"
1988 K100RS SE "Special Ed"
1994 K75S "Cheetos"
1992 K100RS "Moby Brick" R.I.P.
1982 Honda FT500
1979 Honda XR185
1977 Honda XL125
1974 Honda XL125
1972 OSSA Pioneer 250
1968 Kawasaki 175
    

Two Wheels Better

Two Wheels Better
Moderator
Moderator
Moved from Member's Intro to Special Tools and Jigs, well, just because.


__________________________________________________
"A long ride is the answer to a question you will soon forget!" ~ Anonymous
1977 R75/7-100, '93 K11/K12 Big Block, '93 K1100RS, '95 R100 Mystic, '96 K1100RS, 2 x '98 K1200RS, '06 K1200R & '09 K1300GT
    

fishboy316

fishboy316
Life time member
Life time member
Locknut on the swing arm pin is a 27mm I believe. Not sure about 19mm.

Bill

    

92KK 84WW Olaf

avatar
Life time member
Life time member
I have to have a 19mm in my tool kit but can't remember what for. I have 17 and 18mm as well.

Rear shock top mount, sump drain plugs, rear wheel bolts come to mind. I know something uses it.


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

fishboy316

fishboy316
Life time member
Life time member
Olaf, I believe you are correct on the shock mount bolt being a 19.

    

Laitch

Laitch
Life time member
Life time member
A 19mm open-end wrench can be used on the flats of the camshafts to rotate them for checking valve clearances.

A 22mm open-end wrench can be used to grip the flats of the fork tube spring retainer when a stubborn hex head screw is being removed to enable replacement of fork oil.


__________________________________________________
1995 K75 90,000 miles
    

Dai

Dai
Life time member
Life time member
Yes to both of the above comments on the need for a 19mm spanner. Or socket, if you're sneaking up on the rear shock mount.

Okay, alright, so you need a spanner on the inside if the wheel is still on. Otherwise two sockets will do nicely.

Yes, I've finished. For now  Just bought 85 K100 ' LT ' -tool question 1f606


__________________________________________________
1983 K100 naked upgraded to K100LT spec after spending time as an RS and an RT
1987 K100RT
Others...
1978 Moto Guzzi 850-T3, 1979 Moto Guzzi 850-T3 California,1993 Moto Guzzi 1100ie California
2020 Royal Enfield Bullet 500
    

92KK 84WW Olaf

avatar
Life time member
Life time member
Dai wrote:Yes to both of the above comments on the need for a 19mm spanner. Or socket, if you're sneaking up on the rear shock mount.

Okay, alright, so you need a spanner on the inside if the wheel is still on. Otherwise two sockets will do nicely.

Yes, I've finished. For now  Just bought 85 K100 ' LT ' -tool question 1f606
Dai thats it. I have towbars on the Ks but to be fair the wheel comes out quite easily. But to remove the rear shock single handed it is easier to leave the wheel on and wedge it it at the right height and just pull the shock. Hence the 19mm spanner.

You need 2 10mm spanners in the kit too.......


__________________________________________________
1992 K100LT 0193214 Bertha Blue 101,000 miles
1984 K100RT 0022575 Brutus Baja Red 578 bought 36,000 now 89,150 miles
1997 K1100LT 0188024 Wotan Mystic Red 689 58,645 now 106,950 miles Deceased.
1983 K100RS 0011157 Fricka 606 Alaska Blue 29,495 miles Damn K Pox Its a Bat outta Hell Now 58,200 miles. 
1996 K1100LT 0233004 Lohengrin Mystic Red 38,000 miles currently 51,800 miles.
1983 K100RS 0004449 Odette R100 colours 58,000 miles. Sprint fairing now 63,390 miles

Past:
1968 Yamaha 80 YG1
1971 Yamaha 125 YAS-1
1968 Honda 125 SS
1970 Honda CD 175
1973 Honda CB500-4
Honda CX 500
    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

K100-forum.com » Technical, repair and troubleshooting » Special tools and jigs » Just bought 85 K100 ' LT ' -tool question

Permissions in this forum:
You cannot reply to topics in this forum