K1100LT new in stable, new problems

PiotrK100 · 1 K1100LT new in stable, new problems Fri Jun 01, 2018 4:17 pm

PiotrK100

Silver member

Number of posts : 65

K1100LT new in stable, new problems Wp_20110

Hi
I'm "contaminated" by flying bricks and now bought another one (have K100 and K1200RS) which is K1100LT 1992. This bike was siting for few years outside and have some damages because of sun and rain. I removed all fairings and start repairing what was broken, so bounch of work. Anyway, I need electric wire schema if someone could provide me with. I fixed allmost all issues apart from: no brake lights (switches ok) no power on wires in the lamp so no tail light as well. Turn are working. Also gauges for fuel leverl and temperature are not working. I checked all I could but to know more must unbend a lot of wires. So maybe someone have an idea what may that be, maybe I do not connect properly some information. Main problem is of course lack of power for brakes and tail.
I stuck and have no ide where to dig or what to do.

I almost forgot mention about ABS fault. It flashes, I was trying to reset control unit several times but no results. I checked faulty codes and unfortunatley it is 7 which meance that abs unit is fauty. Is that any option to repair it or to get more info what is wrong??

Inge K. · 2 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 6:42 pm

Inge K.

VIP

Number of posts : 4321

For the wiring scheme to the tail /brake...you can use wiring scheme you
find at the portal...is the BMU removed?

As both extra instrument don't function, first i would suspect is power or
ground...the Connector you find under the tank...power:green/black...
brown: ground.

Picture of the connector: https://www.k100-forum.com/t1686p50-fuel-pump-not-powering-up#162877

PiotrK100 · 3 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 7:24 pm

PiotrK100

Silver member

Number of posts : 65

Inge K. wrote:For the wiring scheme to the tail /brake...you can use wiring scheme you
find at the portal...is the BMU removed?

As both extra instrument don't function, first i would suspect is power or
ground...the Connector you find under the tank...power:green/black...
brown: ground.

Picture of the connector: https://www.k100-forum.com/t1686p50-fuel-pump-not-powering-up#162877

First of all ,its been a long time Inge!!!! BMU is not removed, but maybe should be.Will you pls redirect me to the wiring scheme ....on this portal. What that both extra instruments have in common? mean connections? This bike is a pain in the ass because was exposed for long time for weather conditions, just trying to put all that puzzles together. ABS will be the next big issue.

duck · 4 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 7:35 pm

duck

Life time member

Number of posts : 4460

I have a bunch of K wiring diagrams here:

http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/kwiring/kwiring.htm

Rick G · 5 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 8:37 pm

Rick G

admin

Number of posts : 12058

PM Sent with links to that circuit and a manual

PiotrK100 · 6 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 4:52 am

PiotrK100

Silver member

Number of posts : 65

Thanks a lot for diagrams, will try to chase the problem today. Also have read a lot of information about ABS problem and must figure out what may be the reason of malfunction.

Piotr

Rick G · 7 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 8:29 am

Rick G

admin

Number of posts : 12058

For the ABS have a look here http://bmwk10075abs1fix.web.fc2.com/ What Tosi doesn't know about the ABS isn't worth knowing

PiotrK100 · 8 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 4:35 pm

PiotrK100

Silver member

Number of posts : 65

I spend many hours today to find out the problems. First of all I repait missing stop and tail, HOW?? because was missing something like bulb monitoring device (or how we call it) see on the pics, that one is from my friend K100. But anyway it was just empty socket!!! I must return that thing to my friend so where I can but that one? What exactly looking for? I'm pissed because previous owner had to sell it and did not say anything!!! Another case is that I could not find on the wiring diagram additional temp and fuel gauges whih are no working now. I gues that is to big councident that they did not work together but in this bike all is possible. My warm request is that I need diagram for this additional gauges (which are equiper in LT in side fairings VDO) to find the reason why they did not working. That was very fruitful day in my garage regarding lights but still must repair this gauges.

K1100LT new in stable, new problems Wp_20113

K1100LT new in stable, new problems Wp_20114

Inge K. · 9 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 6:04 pm

Inge K.

VIP

Number of posts : 4321

BMU.

You can bridge the contacts in the socket.

E1 and E2 to 54A.
58E to 58A.

You can search a used relay.

You can buy a new relay, part nr. 61 31 1 459 003.

GAUGES.

Have you tried to measure at the connector under the tank.

PiotrK100 · 10 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 6:31 pm

PiotrK100

Silver member

Number of posts : 65

Thanks Inge. I was looking at the connectors and for a first view looking ok, and did not measure anything because can not locate it on diagram. Must follow the wires but can not locate that two additional gauges despite of the fact t is LT diagram.

BTW if I do bridge the BMU, what will be the change for anything? Did it have any influence on the other elactric devices or I can just bridge fearless?

duck · 11 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 8:10 pm

duck

Life time member

Number of posts : 4460

The BMU is a standalone circuit. Won't impact anything else.

Inge K. · 12 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 8:40 am

Inge K.

VIP

Number of posts : 4321

PiotrK100 wrote:Thanks Inge. I was looking at the connectors and for a first view looking ok, and did not measure anything because can not locate it on diagram.

You don't need a diagram to check if there is 12V+ present at the green/black
wire and 12V- present at the brown wire.

PiotrK100 · 13 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 8:55 am

PiotrK100

Silver member

Number of posts : 65

Will do that today asap. LAst days I'm doing notj=hing but bringing that old lady to life.
I have another question regarding silencer/exchaust because inside mine (cat or silencer itself) I can hear a loose parts and annoying noise. Do you have any ideas about repairing (I do not think is possible) or any after market replacement?

Inge K. · 14 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 9:49 am

Inge K.

VIP

Number of posts : 4321

Have someone to cut the silencer open, remove the loose parts, weld it close.

PiotrK100 · 15 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 12:13 pm

PiotrK100

Silver member

Number of posts : 65

Inge I connect (bridge) as you suggested to avoid BMU and only fuse burned, I checked twice and same situation.

Regarding additional gauges I found (I hope is that one) connector with two wires exactly colours as you mention and there is power and negative on it.

K1100LT new in stable, new problems Wp_20115

duck · 16 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 12:42 pm

duck

Life time member

Number of posts : 4460

The unattached connector with two wires in the lower middle of your picture is for heated grips.

PiotrK100 · 17 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 12:57 pm

PiotrK100

Silver member

Number of posts : 65

duck wrote:The unattached connector with two wires in the lower middle of your picture is for heated grips.

Weird, did not notice heated grips, but maybe because all switches are without sign and all I can recognize is abs. So where is that connector Inge is talking about???? But colours of wires are as Inge stated, so was thinking it must be it.

Inge K. · 18 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 1:05 pm

Inge K.

VIP

Number of posts : 4321

PiotrK100 wrote: Weird, did not notice heated grips,

A reason could be that it isn't anything connected to the connector.

PiotrK100 wrote: So where is that connector Inge is talking about????

Have a look at that link in post 2 again.

BMU.
When does the fuse blow? bridging the terminals turn on the ignition turn on the light.

Maybe this short is the reason to why the BMU is removed.
Did it function OK with Your friends BMU?

Last edited by Inge K. on Sun Jun 03, 2018 1:17 pm; edited 1 time in total

duck · 19 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 1:11 pm

duck

Life time member

Number of posts : 4460

The connector for the fuel and temp gauge intermediate wiring looks like this:
(This is a picture from a K75 but the K1100 uses the same connector.)

K1100LT new in stable, new problems Auxgau10

PiotrK100 · 20 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 2:59 pm

PiotrK100

Silver member

Number of posts : 65

Inge K. wrote:

PiotrK100 wrote: Weird, did not notice heated grips,

A reason could be that it isn't anything connected to the connector.

Yes, Yes,Yes heated grips are working!!! Ha, one step forward. Maybe you have any idea what is for the second switch from left? Works like flash lights so no positions. Grrrrr...can not load the pic.

PiotrK100 wrote: So where is that connector Inge is talking about????

Have a look at that link in post 2 again.

BMU.
When does the fuse blow? bridging the terminals turn on the ignition turn on the light.

Maybe this short is the reason to why the BMU is removed.
Did it function OK with Your friends BMU?

Yes, BMU works super and all works flawessly, just wanted to give it back to my friend and bridge all connection. It blows fuse N01 as soon as I turn ignition ON without even lights.

PiotrK100 · 21 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 3:01 pm

PiotrK100

Silver member

Number of posts : 65

duck wrote:The connector for the fuel and temp gauge intermediate wiring looks like this:
(This is a picture from a K75 but the K1100 uses the same connector.)

Yes, and that is exactly the conector Inge shows but somehow can not find it ....will take of majority of wireloom tomorrow and looking for that connector.

PiotrK100 · 22 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 3:42 pm

PiotrK100

Silver member

Number of posts : 65

Finally got that pic with switches, so from left: windshield, UNKNOWN, heated grips, abs. Interested in unknown.

K1100LT new in stable, new problems Wp_20116

robmack · 23 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 3:58 pm

robmack

Life time member

Number of posts : 2334

PiotrK100 wrote:Interested in unknown.

Follow the wiring. Wire colours please.

duck · 24 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 4:16 pm

duck

Life time member

Number of posts : 4460

Probably a hazard flasher switch. Wiring for that is yellow/violet and brown.

PiotrK100 · 25 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 4:44 pm

PiotrK100

Silver member

Number of posts : 65

robmack wrote:

PiotrK100 wrote:Interested in unknown.

Follow the wiring. Wire colours please.

I got the pic of the switch and colours

K1100LT new in stable, new problems Wp_20117

!!!!

robmack · 26 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 4:51 pm

robmack

Life time member

Number of posts : 2334

100% it's the hazzard switch. It's missing the actuator.

PiotrK100 · 27 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 4:59 pm

PiotrK100

Silver member

Number of posts : 65

K1100LT new in stable, new problems Wp_20119

PiotrK100 wrote:

duck wrote:The connector for the fuel and temp gauge intermediate wiring looks like this:
(This is a picture from a K75 but the K1100 uses the same connector.)

Yes, and that is exactly the conector Inge shows but somehow can not find it ....will take of majority of wireloom tomorrow and looking for that connector.

I must be stupid or something (wife says I'm stupid and other stuff.....off record) wrong with me but I can not locate that connector. Was looking hardly but looks like my wife is right.

Last edited by PiotrK100 on Mon Jun 04, 2018 5:12 pm; edited 1 time in total

PiotrK100 · 28 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 5:01 pm

PiotrK100

Silver member

Number of posts : 65

robmack wrote:100% it's the hazzard switch. It's missing the actuator.

Sorry for stupid question , what is actuator? Is not working anyway..

robmack · 29 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 5:53 pm

robmack

Life time member

Number of posts : 2334

The black cap that one would flip to turn the switch on and off. It's obviously missing, so you'll have to get another replacement switch.

Try digging around the cabling on the right side of the bike under the tank to look for that connector. It's often buried. The connector looks like one of those old fashion hard disk drive power connectors that PCs used to have.

duck · 30 Re: K1100LT new in stable, new problems Tue Jun 05, 2018 1:04 am

duck

Life time member

Number of posts : 4460

You can't tell from a picture if it's missing the internal slider part.

More about switches:

http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/dashswitch/dashswitch.htm

How to backlight them with LEDs:

http://www.kbikeparts.com/classickbikes.com/ckb.tech/0.ckb.tech.files/led.switch/led.switch.htm

Laitch · 31 Re: K1100LT new in stable, new problems Tue Jun 05, 2018 7:25 am

Laitch

Life time member

Number of posts : 3261

PiotrK100 wrote:Sorry for stupid question , what is actuator? Is not working anyway..

robmack wrote:The black cap that one would flip to turn the switch on and off

It appears to me that he is holding the switch by that cap.

K1100LT new in stable, new problems Hazard10

K1100LT new in stable, new problems 4_way_10

PiotrK100 · 32 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 7:56 am

PiotrK100

Silver member

Number of posts : 65

Still rebulding my wireloom but that work drive me crazy. I have a tricky question: in my K1100 LT I can switch lights and turn signals without ignition key on. Just like I leave the bike on the street everybody can switch lights and turn signal. WTF? I do not think it is original because that is stupid. Please can someone help me saying how to change it?

Inge K. · 33 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 8:10 am

Inge K.

VIP

Number of posts : 4321

If you also can use the horn, then the LSR have welded its contacts together.

duck · 34 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 8:16 am

duck

Life time member

Number of posts : 4460

Hard to tell exactly how things are wired on your bike over The Internet but from the factory:

Headlight: Headlight power to the right combination switch should come in via a green/blue wire from the load shedding relay.

Turn signals: Switched power to the flasher relay should come in via a green/brown wire from Fuse #7.

Hope that helps.

PiotrK100 · 35 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 9:27 am

PiotrK100

Silver member

Number of posts : 65

Inge K. wrote:If you also can use the horn, then the LSR have welded its contacts together.

Will check it out in one hour if horn works as well (I think yes). But pls highlight me what is LSR?

mike d · 36 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 9:47 am

mike d

Life time member

Number of posts : 616

LSR = Load Shed Relay (see Duck's response).

Mike

norton71 · 37 K1100LT new in stable Sat Jun 09, 2018 12:10 pm

norton71

Silver member

Number of posts : 121

Why does ducks duck look like it needs to get wet but doesn't and why oh why does it have a "WHITE" of all colours cable tie around it's neck...do ducks taste better with white cable ties ?? Smile

duck · 38 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 12:29 pm

duck

Life time member

Number of posts : 4460

Accusing me of using white zip-ties? Them is fightin' words. Mad

It's a collar of white feathers.

norton71 · 39 K100 New in Stable Sat Jun 09, 2018 12:37 pm

norton71

Silver member

Number of posts : 121

Sorry have never seen white feathers(white ziptie)before with BMW K100RT printed on them (requires very large magnification via hubble telescope to confirm this)..must be my bad lol Very Happy

PiotrK100 · 40 Re: K1100LT new in stable, new problems Mon Jun 11, 2018 4:56 pm

PiotrK100

Silver member

Number of posts : 65

I must be stupid because can not find connector for temp and fuel gauges (was checking all) and also have no idea why lights and turn signal can be swichen on without ignition. See picture, I think LSR is with the wires as should be. What else can I checked?? Looks like noone "dig" in wireloom earlier but of curse never know

Dai · 41 Re: K1100LT new in stable, new problems Mon Jun 11, 2018 5:24 pm

Dai

Life time member

Number of posts : 5714

It's a flat four-pin connector, under the fuel tank, on the left side of the frame.

PiotrK100 · 42 Re: K1100LT new in stable, new problems Mon Jun 11, 2018 5:58 pm

PiotrK100

Silver member

Number of posts : 65

Dai wrote:It's a flat four-pin connector, under the fuel tank, on the left side of the frame.

I know, I was told it is there but unfortunately I'm blind, stupid or whatever you can call me but can not find it!!!! Many, many connectors but not that one!!

Inge K. · 43 Re: K1100LT new in stable, new problems Tue Jun 12, 2018 7:49 am

Inge K.

VIP

Number of posts : 4321

PiotrK100 wrote: I must be stupid because can not find connector for temp and fuel gauges (was checking all)

Follow the wiring from the gauges in the lower fairing sidepanels.

PiotrK100 wrote: and also have no idea why lights and turn signal can be swichen on without ignition.

As earlier mentioned in this thread it's probably the LSR that have welded its
contacts (if you can use the horn, too).
Try to swap with the horn relay (in front of the LSR)....if then OK, give the
LSR a gentle knock with the rearside of the screwdriver handle.

PiotrK100 · 44 Re: K1100LT new in stable, new problems Tue Jun 12, 2018 2:57 pm

PiotrK100

Silver member

Number of posts : 65

Inge K. wrote:

PiotrK100 wrote: I must be stupid because can not find connector for temp and fuel gauges (was checking all)

Follow the wiring from the gauges in the lower fairing sidepanels.
That will wait a bit because I'm going for a ride from Poland to Albanie and Italy about 5000km . Of course on a brick K1200RS. But back to subject, that two gauges piss me of a lot because I was digging in a wire loom for hours. But as allways that will be something small that is a pain in the ass. This bike was standing outside for years and many things looks bad like bolts and electric connection.

PiotrK100 wrote: and also have no idea why lights and turn signal can be swichen on without ignition.

As earlier mentioned in this thread it's probably the LSR that have welded its
contacts (if you can use the horn, too).
Try to swap with the horn relay (in front of the LSR)....if then OK, give the
LSR a gentle knock with the rearside of the screwdriver handle.
Inge..you are the Man...it works, just gentleknock was not enough, I hit LSR and comes back to normality. Thanks a lot for advice

Sponsored content

1 K1100LT new in stable, new problems Fri Jun 01, 2018 4:17 pm

PiotrK100

2 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 6:42 pm

Inge K.

3 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 7:24 pm

PiotrK100

4 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 7:35 pm

duck

5 Re: K1100LT new in stable, new problems Fri Jun 01, 2018 8:37 pm

Rick G

6 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 4:52 am

PiotrK100

7 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 8:29 am

Rick G

8 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 4:35 pm

PiotrK100

9 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 6:04 pm

Inge K.

10 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 6:31 pm

PiotrK100

11 Re: K1100LT new in stable, new problems Sat Jun 02, 2018 8:10 pm

duck

12 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 8:40 am

Inge K.

13 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 8:55 am

PiotrK100

14 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 9:49 am

Inge K.

15 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 12:13 pm

PiotrK100

16 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 12:42 pm

duck

17 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 12:57 pm

PiotrK100

18 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 1:05 pm

Inge K.

19 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 1:11 pm

duck

20 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 2:59 pm

PiotrK100

21 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 3:01 pm

PiotrK100

22 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 3:42 pm

PiotrK100

23 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 3:58 pm

robmack

24 Re: K1100LT new in stable, new problems Sun Jun 03, 2018 4:16 pm

duck

25 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 4:44 pm

PiotrK100

26 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 4:51 pm

robmack

27 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 4:59 pm

PiotrK100

28 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 5:01 pm

PiotrK100

29 Re: K1100LT new in stable, new problems Mon Jun 04, 2018 5:53 pm

robmack

30 Re: K1100LT new in stable, new problems Tue Jun 05, 2018 1:04 am

duck

31 Re: K1100LT new in stable, new problems Tue Jun 05, 2018 7:25 am

Laitch

32 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 7:56 am

PiotrK100

33 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 8:10 am

Inge K.

34 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 8:16 am

duck

35 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 9:27 am

PiotrK100

36 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 9:47 am

mike d

37 K1100LT new in stable Sat Jun 09, 2018 12:10 pm

norton71

38 Re: K1100LT new in stable, new problems Sat Jun 09, 2018 12:29 pm

duck

39 K100 New in Stable Sat Jun 09, 2018 12:37 pm

norton71

40 Re: K1100LT new in stable, new problems Mon Jun 11, 2018 4:56 pm

PiotrK100