Master cylinder bleeding

audibob · 1 Master cylinder bleeding Thu May 17, 2018 7:18 am

audibob

Life time member

Number of posts : 378

I am waiting for a new front master cylinder and would like to know whether to bleed the master cylinder

itself, prior to connecting the brake hose.

I could bolt my original hose to the new unit and dip the end back in the reservoir and bleed it, or just connect

everything and pull fluid through .

Anyone found a benefit to bleeding the Master cylinder first ?

Bob

Dai · 2 Re: Master cylinder bleeding Thu May 17, 2018 12:38 pm

Dai

Life time member

Number of posts : 5694

None whatsoever. Connect it all up and bleed in the usual way (the hydraulic system, not you! Very Happy

).

audibob · 3 Master cylinder bleeding Thu May 17, 2018 6:49 pm

audibob

Life time member

Number of posts : 378

Thanks Dai,

All fitted and bled with a nice firm feel to the lever.

With new braided hoses up front too, cannot wait to try them out, once the bike is back on the road.

Going to look at a 1996 k1100lt.se tomorrow in York advertised on gumtree.

Had nine previous owners , but the last for 5 years so fingers crossed.

Bob

92KK 84WW Olaf · 4 Re: Master cylinder bleeding Fri May 18, 2018 5:40 am

92KK 84WW Olaf

Life time member

Number of posts : 7953

You will likely come home with the K1100LT.

Darn nice machine.

If headers are not cracked buy and fit new mounting rubbers. They all crack eventually. A few K1100LTs at K Fest, 2 with Remus exhausts on...... Two nice Highline models too..!

96 will be ABS 2, as in modulators not down at the footrest hangers.

Sponsored content

1 Master cylinder bleeding Thu May 17, 2018 7:18 am

audibob

2 Re: Master cylinder bleeding Thu May 17, 2018 12:38 pm

Dai

3 Master cylinder bleeding Thu May 17, 2018 6:49 pm

audibob

4 Re: Master cylinder bleeding Fri May 18, 2018 5:40 am

92KK 84WW Olaf

5 Re: Master cylinder bleeding

Sponsored content