BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


1Back to top Go down   1990 k100 rs 16v abs model Empty 1990 k100 rs 16v abs model Sat Jul 04, 2015 5:54 am

marknico

marknico
active member
active member
Good morning all, got a weird problem with back brake, the wheel spins freely ie. brake not dragging but after awhile of riding bike the rear brake fails due excessive heat it will work when it cools down again. Brake pistons are free and new pads have been fitted can the abs modulators cause problems ( abs is disconnected via removed relay ) also can I bypass rear brake modulator without buying new brake lines ect. ?
Cheers

    

2Back to top Go down   1990 k100 rs 16v abs model Empty Re: 1990 k100 rs 16v abs model Sat Jul 04, 2015 6:26 am

Rick G

Rick G
admin
admin
Your rear master cylinder may not be returning to the correct position and preventing the fluid having a way of expanding when it warms up. On the brake lever in front of the M/C there is a socket head grub screw (allen screw) turn that out a bit and that will allow the M/C to return to the home position. There are several other things that could be wrong but give that a try first it is often the problem.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

3Back to top Go down   1990 k100 rs 16v abs model Empty Re: 1990 k100 rs 16v abs model Sat Jul 04, 2015 6:51 am

marknico

marknico
active member
active member
RicK G wrote:Your rear master cylinder may not be returning to the correct position and preventing the fluid having a way of expanding when it warms up. On the brake lever in front of the M/C there is a socket head grub screw (allen screw) turn that out a bit and that will allow the M/C to return to the home position. There are several other things that could be wrong but give that a try first it is often the problem.

I ll give that ago do I turn it clockwise or anti-clockwise ? Cheers

    

4Back to top Go down   1990 k100 rs 16v abs model Empty Re: 1990 k100 rs 16v abs model Sat Jul 04, 2015 7:13 am

Rick G

Rick G
admin
admin
Anti clockwise looking at the end you put the key.

If it does work put somr locktite on the thread to prevent it turning again.


__________________________________________________
"Man sacrifices his health in order to make money.
Then he sacrifices money to recuperate his health.
And then he is so anxious about the future that he does not enjoy the present; the result being that he does not live in the present or the future; he lives as if he is never going to die, and then dies having never really lived."   Dalai Lama


Bikes 1999 K1100 LT with a Big Block 1200
    

5Back to top Go down   1990 k100 rs 16v abs model Empty Re: 1990 k100 rs 16v abs model Sat Jul 04, 2015 7:15 am

marknico

marknico
active member
active member
RicK G wrote:Anti clockwise looking at the end you put the key.

If it does work put somr locktite on the thread to prevent it turning again.

Many thanks I ll give it a try

    

Sponsored content


    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum