BMW K bikes (Bricks)


You are not connected. Please login or register

View previous topic View next topic Go down  Message [Page 1 of 1]


gabriel

avatar
Platinum member
Platinum member
Hi everyone

Does anyone know how to remove the oily crud surrounding the fuel injectors and avoid oily contaminants falling into the fuel injector holes?

Thanks
Gabriel

    

Holister

Holister
Life time member
Life time member
Spray engine degreaser around the injector recesses... wait 15min... hose out.
Then with a ¼" tube duct taped into your vacuum cleaner nozzle, suck out any crude/water/dirt remaining.
Wait for any remaining water to dry out and carefully pull the injectors.
Carefully clean out any remaining crud.
Use strips of rag rolled into a plug to block the holes.


__________________________________________________

1989 K100RT     VIN  0097367 (naked)  
1996 K1100RS   VIN  0451808
 Dirty engine cases and fuel injectors.... Austra12    Fuel:  95 Octane
Engine Oil: Nulon Full Synthetic 15W50
Gear Box Oil:  Nulon Synthetic 75W90
    

View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum